Sponsored Links
-->

Tuesday, December 12, 2017

ramé-hart Goniometer / Tensiometer Model 250
src: www.ramehart.com

A Tensiometer as it applies to physics is an instrument used to measure the surface tension ( ? {\displaystyle \scriptstyle \gamma } ) of liquids or surfaces. Tensiometers are used in research and development laboratories to determine the surface tension of liquids like coatings, lacquers or adhesives. A further application field of tensiometers is the monitoring of industrial production processes like parts cleaning or electroplating.


Video Tensiometer (surface tension)



Types

Goniometer/Tensiometer

Surface scientists sometimes use a Goniometer/Tensiometer to measure the surface tension and interfacial tension of a liquid using the pendant or sessile drop methods. A drop is produced and captured using a CCD camera. The drop profile is subsequently extracted, and sophisticated software routines then fit the theoretical Young-Laplace equation to the experimental drop profile. The surface tension can then be calculated from the fitted parameters. Unlike other methods, this technique requires only a small amount of liquid making it suitable for measuring interfacial tensions of expensive liquids.

Du Noüy-Padday method

This method uses a rod which is lowered into a test liquid. The rod is then pulled out of the liquid and the force required to pull the rod is precisely measured. This is a rather novel method which is accurate and repeatable. The Du Noüy-Padday Rod Pull Tensiometer will take measurements quickly and unlike the ring and plate methods, will work with liquids with a wide range of viscosities.

Du Noüy Ring Tensiometer

This type of tensiometer uses a platinum ring which is submersed in a liquid. As the ring is pulled out of the liquid, the force required is precisely measured in order to determine the surface tension of the liquid. This method requires that the platinum ring be nearly perfect; even a small blemish or scratch can greatly alter the accuracy of the results. A correction for buoyancy must be made. This method is considered less accurate than the plate method but is still widely used for interfacial tension measurement between two liquids.

Wilhelmy Plate Tensiometer

The Wilhelmy Plate tensiometer requires a plate to make contact with the liquid surface. It is widely considered the simplest and most accurate method for surface tension measurement.

Bubble pressure Tensiometer

Due to internal attractive forces of a liquid, air bubbles within the liquids are compressed. The resulting pressure (bubble pressure) rises at a decreasing bubble radius. The bubble pressure method makes use of this bubble pressure which is higher than in the surrounding environment (water). A gas stream is pumped into a capillary that is immersed in a fluid. The resulting bubble at the end of the capillary tip continually becomes bigger in surface; thereby, the bubble radius is decreasing.

The pressure rises to a maximum level. At this point the bubble has achieved its smallest radius (the capillaryradius) and begins to form a hemisphere. Beyond this point the bubble quickly increases in size and soon bursts, tearing away from the capillary, thereby allowing a new bubble to develop at the capillary tip. It is during this process that a characteristic pressure pattern develops (see picture), which is evaluated for determining the surface tension.

Because of the easy handling and the low cleaning effort of the capillary, bubble pressure tensiometers are a common alternative for monitoring the detergent concentration in cleaning or electroplating processes.


Maps Tensiometer (surface tension)



See also

  • Surface tension
  • Young-Laplace equation
  • Capillary action
  • Piezometer
  • Pierre Lecomte du Nouy

List Manufacturers of Tensiometer Surface Tension, Buy Tensiometer ...
src: sc02.alicdn.com


References


Tensiometer (surface tension) - Wikiwand
src: upload.wikimedia.org


External links

Media related to Tensiometer (surface tension) at Wikimedia Commons

  • Process parameter surface tension
  • Fundamentals Wilhelmy method

Source of article : Wikipedia